HDPE Uniaxial Geogrid
HDPE Uniaxial Geogrid
HDPE uniaxial geogrids typically have their tensile strength in the machine (roll) direction. They are mainly used to reinforce the soil mass in a steepened slope or segmental retaining wall. On occasion, they function as a wrapping to confine the aggregate in the wire forms of welded wire faced steepened slopes.
As a HDPE uniaxial geogrid supplier in China, we Shanghai Yingfan Environmental Engineering Co., Ltd. provides material and installation service for our respected customers for many years. Our company is an expert in manufacturing many geosynthetics in Shanghai city, the biggest city in China. We are the leading company in Shanghai geosynthetic industry.
Uniaxial Geogrid Roll |
Uniaxial Geogrids HDPE |
Uniaxial Geogrids Plastic |
HDPE Uniaxial Geogrid Introduction
Uniaxial geogrids typically have their tensile strength in the machine (roll) direction. They are mainly used to reinforce the soil mass in a steepened slope or segmental retaining wall. On occasion, they function as a wrapping to confine the aggregate in the wire forms of welded wire faced steepened slopes.
Our Yingfan uniaxial geogrids are flat planar netting structure made from extrusion of high density polyethylene resin, sheeting, punching and stretching on one direction. These flexible, user-friendly geogrids are inert to biological degradation and resistant to creep, strain and naturally found chemicals.
Its performance can meet or exceed our national standard GB/T17689.
Processing way of HDPE Uniaxial Geogrid:
Features and benifits
• Used in the various environments.
• UV stabilized.
• Used with variety of materials, including soil and concrete.
• Resistance to the low temperature. It can be used in the minus 45 degrees to 50 degrees.
• Resistance to the long term chemical or biological degradation.
• High stability and bearing capacity to increase service life.
• High tensile loads in the transverse direction.
• Prevent the material loss caused by the roadbed distortion and crack.
• Lightweight for quick installation and low construction cost.
1. Reinforced slope (facing angle < 70° to horizontal);
2. Reinforced wall (facing angle > 70° to horizontal);
3. Reinforced foundation (also called basal reinforcement).
 |
 |
 |
FAQ
Q1: Can you accept L/C payment term?
A1: Yes, we can.
Q2: What is your port of delivery?
A2: Usually it is Shanghai port China. If you request other port of China, we also can arrange.
Q3: Can you accept OEM order?
A3: Yes, we can.
Shanghai Yingfan Co.,, headquarter in Shanghai and having branches in Chendu city and Xian city, is one of the leading and comprehensive geosynthetics manufacturer and installation service supplier in China. We warmly welcome all of the customers from the other parts of the world to inquiry and contact us.
Specification
1. Tensile strength range: 30kN/m---200kN/m.
2. Width: 4m or as request.
HDPE uniaxial geogrid product meet or exceed our national standard GB/T 17689 as showed below:
|
Product Spec. |
Ultimate Tensile Strength MD/CD kN/m ≥ |
Tensile strength @ 2% MD/CD kN/m ≥ |
Tensile strength @ 5% MD/CD kN/m ≥ |
Elongation at ultimate tensile strength MD/CD % ≤ |
|
TGDG35 |
35.0 |
7.5 |
21.5 |
|
|
TGDG50 |
50.0 |
12.0 |
23.0 |
|
|
TGDG80 |
80.0 |
21.0 |
40.0 |
|
|
TGDG120 |
120.0 |
33.0 |
65.0 |
|
|
TGDG160 |
160.0 |
47.0 |
93.0 |
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
